You want to convert a wall to dry erase board, coat it in clear or change the color of the wall. If you want it to match your filing cabinets and cubicles we can coat your wall with metallic colors.No longer do you have to have a WHITE dry erase board. You can now have it clear or colors for any surface. You can coat any chalkboard with clear and turn it into a dry erase board. It is now your choice for your décor. See our dry erase painting video here.
I was taught to paint by a professional and when estimating the amount of paint needed, I always allow for a second coat just to make sure of coverage. We interviewed a painter who tried to tell me I bought poor quality paint without knowing where I purchased it, and stated he would have to buy all new paint. He had not seen the cans and was just guessing so I asked him where I should buy paint from now on. It was the same place I had purchased my paint and he wanted to charge me an extra 20 a gallon more than what I paid for. Needless to say, I have interviewed numerous painters and they are not all honest.
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
First off all clients want a "deal" As a painting contractor for 38 years I can tell you that residential-commercial-industrial clients (and their needs are all diffrent. It seems this discussion mostly concerns residential repaints,so here goes--first off ALWAYS get a personal referance from a friend or co-worker. Always get an itemized contract that specifies the prep,color, number of coats, and specifics on payment. Remember you want to set up a relationship with the painting contractor of your choice. Bond, license and insurance are required to get a contractors license and are readily available online at your state Labor and Industries website. Second-- find someone you trust. He or his crew will probably be left alone in your home for most of the time. I always tell my clients that I wont bring someone to their home I wouldnt have in mine. Third--$$ Dont ever pay up front always insist on progress draws if the project is 2 or 3 phases remember If a contractor wants $3000 to do the job and you give him half up front he will be working for $1500. It WILL affect the quality of the product. In 38 years of business I have never taken a deposit and have never not been paid in full remember do what you said you would do for exactly what you said it would cost and there will be no problems with getting paid. one last reminder to clients you are also being evaluated when you interview a contractor. He is sizing you up as well. If he thinks you are a bit sketchy the the price will go up or he wont take the job at all. I have turned down some jobs that looked very profitable on the surface that turned out not to be so.(word gets around fast in the small painting community) Good Luck to clients and contractors

Your home is one of your most valued investments. When you hire a painting contractor, you deserve the best workmanship, paint quality and attention to detail available. Locally owned and operated for over 18 years, Brogan’s Home Painting offers the best residential painting contracting services in the Kansas City region, including Johnson County. Based in Overland Park, Kansas, owner Ed Brogan provides personalized service and is attentive to the details of your unique painting needs. Brogan’s Home Painting provides precise and timely estimates, honest and dependable service, and satisfaction guaranteed. If you need an estimate or consultation, give Ed Brogan a call today.
Thorough preparation is essential to ensure a good finish. Contractors might have to fill cracks or holes and remove old paint if it is badly worn, peeling or flaking. They remove all paint and apply a suitable primer to the bare surface. If the existing paint is in reasonable condition, they clean it and rub it with abrasive material to provide a key for the new paint. On new surfaces, such as bare wood or fresh plaster, they apply a suitable seal, followed by a primer coat.
Minor repair and maintenance activities that disturb 6 square feet or less of paint per room inside, or 20 square feet or less on the exterior of a home or building. (Note: Window replacement, and partial and full demolition activities, are always covered regardless of square footage.  Activities designated as “prohibited” are prohibited regardless of square footage.)
There are permanent features of the home that have their own colors which cannot be changed when painting the exterior of the home but can have a dramatic satisfaction level that is experienced when the painting is completed.  Roofing shingles, paving blocks, concrete surfaces, stones and other such features are prime examples of the colors that should be considered when selecting your exterior color scheme for the home.  Homeowners can work off of these colors to make a home that looks uniform and luxurious when the exterior painting is complete.
I do not mean to come off with an edge, however, this is an article for people hiring low bid, uninsured, one man band painters out to "hustle" a buck. Hire reputable, established companies or hire someone you know or have a strong referral from. If you are arguing over watered down paint, ticky, tacky deposits, buying your own supplies, you have hired the wrong guy.
Second: all the tricks of the trade in regard to "cheating" customers is for hustlers and cheaters and NOT established businesses. At the end of the project the job should come out looking professionally painted as specified in the contract. A selected color that takes multiple coats that was not calculated by the contractor should cost more money. It's not the fault of the painter.
Residential house painters on the Handy platform have used countless gallons of paint and tons of brushes over the years. With a wealth of experience under their belts, they know the best, quickest and most cost-effective ways to get the work done. From how to achieve that perfect glossy finish to ensuring no paint drips onto your crown molding, you might find yourself picking up a few tips!
Before we start, you will have to choose your color. If you would like to replicate a color already on your wall, you can use an old can of paint for reference, or you can take a chip to the paint store. We can help you identify the color, the finish, and type of paint with our visualizer tools, and we also offer a Color Consulting Service if you need help coming to a decision.
"Bear Creek Painting did a great job on my house trim. I was having new gutters put on my house but realized that the trim needed to be scraped and painted. Nick was able to get his crew out within a few days. Their work was excellent, timely and Nick was professional and responsive to my need to get the work done quickly. I would definitely use Bear Creek painting for my next painting project."
Thorough preparation is essential to ensure a good finish. Contractors might have to fill cracks or holes and remove old paint if it is badly worn, peeling or flaking. They remove all paint and apply a suitable primer to the bare surface. If the existing paint is in reasonable condition, they clean it and rub it with abrasive material to provide a key for the new paint. On new surfaces, such as bare wood or fresh plaster, they apply a suitable seal, followed by a primer coat.

House Painting

×