To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.

The contents of this web page are Copyright © 2018 Wilson & Hampton Inc. Painting Contractors. All Rights Reserved. Providing commercial & industrial painting in Southern California serving Orange County, Los Angeles County, San Diego County, Riverside County, San Bernardino County, Imperial Valley, Santa Barbara County, Ventura County & Kern County

Second: all the tricks of the trade in regard to "cheating" customers is for hustlers and cheaters and NOT established businesses. At the end of the project the job should come out looking professionally painted as specified in the contract. A selected color that takes multiple coats that was not calculated by the contractor should cost more money. It's not the fault of the painter.
First off, the picture on the top THAT IS A HOME OWNERS PAINT JOB. If you here a school kid or your neighbor, this is what you get. I was a painting contractor for the better part of 40 years and never saw a PAINTER (even the worst painter) leave a mess like that. Maybe the electrician or the carpenter but, that is not something a painter could even do if they tried.
Our family owned and operated painting company is your one stop shop for interior painting, exterior painting, and home repairs. We are a quality first painting company. Our expert team of painters provides quality work and experience that can be measured. Allow our expert team of painters to show you a level of home painting that you can be proud of.
This article is outdated. Deep based colors were an increase in price back in the 90's. Most stores have a standard price for all colors now. The problems the author are citing are outdated and rarely happen. This is the 2nd time I've seen this article being emailed out, it's irresponsible of angies list to keep sending out this poorly written and inaccurate article.
After any areas repaired in the previous step are primed, we apply premium quality paints for a uniform finish. There are multiple finish options, including flat, matte, eggshell, satin, semi-gloss, and high-gloss, and we will have gone over the benefits of each with you beforehand so you can make an informed decision. The time will vary depending on the size of the job, but we will always ensure to work as quickly and efficiently as possible.

Hi Donnie, Thanks for your comment! We would be happy to help you connect with a fencing pro to give you an estimate on your project. You can submit a request to our pros here: www.homeadvisor.com, browse a list of local pros here: http://www.homeadvisor.com/c.html, or send your info to emailus@homeadvisor.com and a project advisor will reach out to assist you. –HASupport

Climate is another factor to consider. Sunlight, wind, rain and salty weather can all wear out exterior paint. Oil-based paint is durable against wind, rain and temperature changes, but sunlight tends to degrade it. Alkyd paint chalks and sheds very thin layers when it begins to wear. Latex paint is the more durable option for very sun-drenched and relatively dry climate areas. Latex paint with high vinyl content should be avoided, however. Acrylic resin is by far the more durable binder for outdoor latex paint.
Proudly Serving Albert Lea, Albertville, Andover, Annandale, Anoka, Apple Valley, Arden Hills, Becker, Big Lake, Bloomington, Brooklyn Center, Brooklyn Park, Buffalo, Burnsville, Cambridge, Cannon Falls, Center City, Centerville, Champlin, Chanhassen, Chaska, Chisago City, Circle Pines, Columbia Heights, Coon Rapids, Corcoran, Cottage Grove, Crystal, Dakota, Dayton, Deephaven, Delano, Eagan, Eden Prairie, Edina, Elk River, Excelsior, Falcon Heights, Faribault, Farmington, Fergus Falls, Forest Lake, Fridley, Golden Valley, Independence, International Falls, Inver Grove Heights, Isanti, Lakeville, Lindstrom, Lino Lakes, Litchfield, Little Canada, Long Lake, Long Prairie, Loretto, Maple Grove, Maple Plain, Maplewood, Marine on St. Croix, Marshall, Medicine Lake, Medina, Mendota, Mendota Heights, Minneapolis, Minnetonka, Minnetonka Beach, Minnetrista, Monticello, Mora, Mound, Mounds View, New Brighton, New Hope, Newport, New Prague, Nicollet, North Oaks, North St. Paul, Norwood Young America, Oakdale, Oak Grove, Oak Park Heights, Orono, Osseo, Otsego, Pine City, Plymouth, Princeton, Prior Lake, Richfield, Robbinsdale, Rockford, Rogers, Sacred Heart, St. Bonifacius, St. Louis Park, St. Michael, St. Paul, St. Paul Park, Sauk Rapids, Savage, Scandia, Shafer, Shakopee, Sherburn, Shoreview, Shorewood, Spring Lake Park, Spring Park, Stacy, Stillwater, South Saint Paul, Taylors Falls, Tonka Bay, Vadnais Heights, Victoria, Waite Park, Waseca, Watertown, Watkins, Watson, Wayzata, West Concord, West St. Paul, White Bear Lake, Willmar,  Woodbury, Wood Lake, Woodland, Woodstock, Wright, Wyoming, Zimmerman.
Wilson Hampton Painting Contractors is Southern California’s most trusted name in wood finishing. From fine furniture refinishing and restoration to custom case work and Specialty finishes, we pride ourselves in returning wood furnishings back to their natural beauty. We can also age the look or create an exotic look of distress, crackling or glazing. Learn more about Wilson & Hampton Painting Contractors.
{ "galleryConfig" : {"galleryTitle":"Videos","galleryItems":[{"id":null,"title":"Structural Repair","url":"http://vimeo.com/229142342","mediaSources":null,"description":"Hazards and proper protection while cutting, grinding, welding.","duration":"5:33","thumbnailUrl":"http://i.vimeocdn.com/video/649374900_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOiUDl4xTsMb8+0quFv997QgNdWvZz2Mbmg8j7OjOgbVQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGP+jFPOyZ3ee6DwfQI8JX24ZFxnZmPEyIqLsTlFciGOsw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Surface Preparation","url":"http://vimeo.com/229114680","mediaSources":null,"description":"Sanding, body filler, solvent wipe down, masking.","duration":"5:30","thumbnailUrl":"http://i.vimeocdn.com/video/649340426_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMPQ/0SzwNC3qxmyzA8rh00JfmhCsY9z0rrOPlnSeOSvA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMqwTDDrdISKJcoFG8R0GddY6B6Mr2/EiEafjBSbL0SbQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Painting","url":"http://vimeo.com/229184542","mediaSources":null,"description":"Mixing coatings, spraying paint, gun cleaning, unmasking.","duration":"12:37","thumbnailUrl":"http://i.vimeocdn.com/video/649429175_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNhkGLICbyNlpZf/0EhR5YbWUtqEe8183loncNEzZwGsA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNJ2dENagcj+OrbkimC85zy6ras5C1T9u1nBUl9fGxnYg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Overview)","url":"http://vimeo.com/229115324","mediaSources":null,"description":"Choosing the best type respirator for your tasks, fit testing","duration":"03:49","thumbnailUrl":"http://i.vimeocdn.com/video/649341202_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNtImajjNHe6jARBiHcD6VuepuJy0zv0FvKpqmb8JUNRg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOSyvZoO5VShIctdMhYrO1ZSYUXz4tfP32j02f90eXfFw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Cleaning and Storage)","url":"http://vimeo.com/228865270","mediaSources":null,"description":"How to clean and maintain your respirator.","duration":"1:46","thumbnailUrl":"http://i.vimeocdn.com/video/649027412_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf4nf0pOeIZcw+VAfgeGBpy0AaSxT7b2QvnLKXY3ZpVyuQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf6dcUZO3dHOxWIvJ+SgFrwgcao7j60JKvPDJahmfVir4Q== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Donning a Half Mask Respirator) ","url":"http://vimeo.com/229146171","mediaSources":null,"description":"Putting on (donning) and fitting a respirator, pressure checks.","duration":"1:57","thumbnailUrl":"http://i.vimeocdn.com/video/649379748_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMkSWDfi0it7h5AX6KfLIovgb+7GyvMtXXt34r9qBjDXQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNa9+q+2lXYwFigwR5wFjtuqcyyAuBkZmAv86gMxzrunQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Chemical Resistant Gloves","url":"http://vimeo.com/228970893","mediaSources":null,"description":"Gloves to protect against solvents, isocyanates and dusts","duration":"02:23","thumbnailUrl":"http://i.vimeocdn.com/video/649161993_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8hjG/6VSgBBA23GFpzQ5vrSEdT1sdNAWrIfRJelqOAEQg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8iVC8uiDwyTy73nbFlsCCU1jmdouKKtJvd5XCoIF3RLrg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Isocyanate Health Hazards","url":"http://vimeo.com/229123604","mediaSources":null,"description":"Isocyanates can cause asthma and airway irritation .","duration":"6:06","thumbnailUrl":"http://i.vimeocdn.com/video/649351377_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGM+LTxO7+opIKVkifEOFsC6cAa7qyBAOoTwcZcKylUeIQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNToiixt8ivhkn14FvljjLq4oFgFgi/rZZhhOSDo3Qe5A== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Solvent Health Hazards","url":"http://vimeo.com/229167358","mediaSources":null,"description":"Effects of solvent exposure: skin, nervous system, liver, etc.","duration":"03:26","thumbnailUrl":"http://i.vimeocdn.com/video/649407194_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BePhRTr7dbZIdQdP6K/RHlVvJZ33hOEbslHHahu2n/+qzQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeMUXLf4Bhuxq/WQ0stgUJ8ofKafv4dkRuhy+ly27/70MQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Sources of Information","url":"http://vimeo.com/228865887","mediaSources":null,"description":"MSDSs, routes of exposure, signs and symptoms of exposure","duration":"03:30","thumbnailUrl":"http://i.vimeocdn.com/video/649028172_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf5/d77jNMgv0uxh2lleucWIelZHfuxL/Y9qMtSOvx87sA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf60tYR5hWn95e5+iSGICXG5Ty9pruywoJUwZiJy1iK/lQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0}],"itemsToLoadIds":[],"slideRowsCount":0}, "displayStyle": "video-gallery-widget" }
When hiring a contractor it is always best to hire one who is personally referred to you by someone you trust. Hiring through ads or phone book is hit and miss. Check with your local paints stores, they know the good guys from the bottom feeders. Go to the stores that sell the high quality paints like Benjamin Moore(nonpareil), Pittsburg, Sherwin Williams or Glidden. Don't go the the big box stores for referrals, the people there don't know squat! 

Minor repair and maintenance activities that disturb 6 square feet or less of paint per room inside, or 20 square feet or less on the exterior of a home or building. (Note: Window replacement, and partial and full demolition activities, are always covered regardless of square footage.  Activities designated as “prohibited” are prohibited regardless of square footage.)
Dave, you said it best! Every pro painting contractor truly worth their salt would and should cut and paste exactly what you say here about where customary and legitimate practices and expectations should be in regards to what customers should expect from contractors and how contractors should professionally deal with their customers. By the way, Dave, if you work in the Atlanta area, I would like to hire you! Thank you for your valuable advice!
We have a deep desire to prove to each and every client that hires us how a professional team of quality home painters works together to accomplish the goal of complete customer satisfaction to make sure the next time you need a painter there is no question on who you are going to call because of the previous experiences that you have had with our group.
You can save a bundle by doing the labor yourself. The biggest DIY expense is paint. Other expenses include buying or renting supplies and equipment, like caulk, primer, brushes, rollers, tarps and ladders or scaffolding. Freeman advises applying paint with brushes, not a sprayer. “If you overspray all the window frames and overspray your shingles and your sidewalks and the brick on the front of the house, you do damage that is not easily fixed,” he says.
Once preparation to your house is completed, our team will then weatherproof the exterior of your home. We ensure complete protection by securing loose paneling and siding, applying caulk wherever it is needed and oil priming all raw wood. Even the most professional paint jobs can be improved by taking time to weatherproof everything beneath the paint.

The other difficult part is getting a painting contractor to show up. While this generalization does not apply to every painter, personally I am extremely grateful if I can get a paint contractor to show up to look at the house and to later produce a written estimate. I hardly fault the painting contractors, because I think it is a combination of the contractors being smaller operations along with a high demand for their work.
{ "galleryConfig" : {"galleryTitle":"Videos","galleryItems":[{"id":null,"title":"Structural Repair","url":"http://vimeo.com/229142342","mediaSources":null,"description":"Hazards and proper protection while cutting, grinding, welding.","duration":"5:33","thumbnailUrl":"http://i.vimeocdn.com/video/649374900_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOiUDl4xTsMb8+0quFv997QgNdWvZz2Mbmg8j7OjOgbVQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGP+jFPOyZ3ee6DwfQI8JX24ZFxnZmPEyIqLsTlFciGOsw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Surface Preparation","url":"http://vimeo.com/229114680","mediaSources":null,"description":"Sanding, body filler, solvent wipe down, masking.","duration":"5:30","thumbnailUrl":"http://i.vimeocdn.com/video/649340426_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMPQ/0SzwNC3qxmyzA8rh00JfmhCsY9z0rrOPlnSeOSvA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMqwTDDrdISKJcoFG8R0GddY6B6Mr2/EiEafjBSbL0SbQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Painting","url":"http://vimeo.com/229184542","mediaSources":null,"description":"Mixing coatings, spraying paint, gun cleaning, unmasking.","duration":"12:37","thumbnailUrl":"http://i.vimeocdn.com/video/649429175_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNhkGLICbyNlpZf/0EhR5YbWUtqEe8183loncNEzZwGsA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNJ2dENagcj+OrbkimC85zy6ras5C1T9u1nBUl9fGxnYg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Overview)","url":"http://vimeo.com/229115324","mediaSources":null,"description":"Choosing the best type respirator for your tasks, fit testing","duration":"03:49","thumbnailUrl":"http://i.vimeocdn.com/video/649341202_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNtImajjNHe6jARBiHcD6VuepuJy0zv0FvKpqmb8JUNRg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOSyvZoO5VShIctdMhYrO1ZSYUXz4tfP32j02f90eXfFw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Cleaning and Storage)","url":"http://vimeo.com/228865270","mediaSources":null,"description":"How to clean and maintain your respirator.","duration":"1:46","thumbnailUrl":"http://i.vimeocdn.com/video/649027412_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf4nf0pOeIZcw+VAfgeGBpy0AaSxT7b2QvnLKXY3ZpVyuQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf6dcUZO3dHOxWIvJ+SgFrwgcao7j60JKvPDJahmfVir4Q== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Donning a Half Mask Respirator) ","url":"http://vimeo.com/229146171","mediaSources":null,"description":"Putting on (donning) and fitting a respirator, pressure checks.","duration":"1:57","thumbnailUrl":"http://i.vimeocdn.com/video/649379748_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMkSWDfi0it7h5AX6KfLIovgb+7GyvMtXXt34r9qBjDXQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNa9+q+2lXYwFigwR5wFjtuqcyyAuBkZmAv86gMxzrunQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Chemical Resistant Gloves","url":"http://vimeo.com/228970893","mediaSources":null,"description":"Gloves to protect against solvents, isocyanates and dusts","duration":"02:23","thumbnailUrl":"http://i.vimeocdn.com/video/649161993_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8hjG/6VSgBBA23GFpzQ5vrSEdT1sdNAWrIfRJelqOAEQg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8iVC8uiDwyTy73nbFlsCCU1jmdouKKtJvd5XCoIF3RLrg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Isocyanate Health Hazards","url":"http://vimeo.com/229123604","mediaSources":null,"description":"Isocyanates can cause asthma and airway irritation .","duration":"6:06","thumbnailUrl":"http://i.vimeocdn.com/video/649351377_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGM+LTxO7+opIKVkifEOFsC6cAa7qyBAOoTwcZcKylUeIQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNToiixt8ivhkn14FvljjLq4oFgFgi/rZZhhOSDo3Qe5A== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Solvent Health Hazards","url":"http://vimeo.com/229167358","mediaSources":null,"description":"Effects of solvent exposure: skin, nervous system, liver, etc.","duration":"03:26","thumbnailUrl":"http://i.vimeocdn.com/video/649407194_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BePhRTr7dbZIdQdP6K/RHlVvJZ33hOEbslHHahu2n/+qzQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeMUXLf4Bhuxq/WQ0stgUJ8ofKafv4dkRuhy+ly27/70MQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Sources of Information","url":"http://vimeo.com/228865887","mediaSources":null,"description":"MSDSs, routes of exposure, signs and symptoms of exposure","duration":"03:30","thumbnailUrl":"http://i.vimeocdn.com/video/649028172_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf5/d77jNMgv0uxh2lleucWIelZHfuxL/Y9qMtSOvx87sA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf60tYR5hWn95e5+iSGICXG5Ty9pruywoJUwZiJy1iK/lQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0}],"itemsToLoadIds":[],"slideRowsCount":0}, "displayStyle": "video-gallery-widget" }
The cost to paint an average size room (10X12) ranges from $380-$790, not including ceilings, trim or cost of the paint. DIY, this can cost between $200-$300. When estimating the cost, painters will start with how much paint will be required to complete the job. To know this, they first need to know the size of the area to be covered. The easiest way to calculate the size of the paintable area is to add together the length of the wall and multiply it by the width of the room from floor to ceiling. The resulting amount is the room's square footage. This total is a starting point, as it is not all paintable surface. The painters won't paint the windows and doors, for example, and they must account for ceiling trim and baseboards as well. The next step is to subtract the area of the doors and windows -- along with the square footage of the trim and baseboards -- to get an average. Then, use the same calculation (length x width) on the windows, doors, trim and baseboards, and subtract all of those numbers. The result of this equation is the square footage of the room's walls. This is your surface area number. (Painters will typically add a little square footage back in to this amount to account for extra paint, which may be required.)
So why not just paint your own home. I'm not a painter, so my wife and I take our time, buying the paint and supplies, and doing our own painting. Yes, we need to tape, and it's not perfect, but we get the satisfaction of seeing our completed work. Get the supplies, sliders for your furniture, and patience and go for it. That way YOU have control over the entire project.
Repaint — exteriors especially — before visible signs of wear appear, Bancroft says. Don’t wait until you see peeling or flaking paint. “If I have to spend 40 hours preparing the surface before we can paint, that time is going to result in a lot of extra costs. But if I can spend 10 hours preparing the surfaces to be painted, you’re going to save money,” Freeman says.

Painting your home, both inside and out, improves its curb appeal, character and resale value. Painting is one of the quickest and easiest ways to give your home a face-lift -- and it yields some of the most dramatic results as well. If you have ever visited the painting section of your local hardware store, you know how overwhelming the multitude of paint choices can be. In addition to colors, there are finishes, stains, maintenance and other options to consider. And, if you're interested in adding a mural or trompe l'oeil, you're looking at a whole different set of choices and associated costs.


I've seen this article sent out 4 times now. It's out dated in terms of today's "Scams." Paint stores haven't charged more money for deeper paint colors in over 15 years. Also Water downed paint? Seriously? That would never happen in the real world. And Wall repair? what painter would ever not assume wall repair as included? This article is a waste of time and should be taken down or edited to reflect actual scams of todays times.
Some contractors work on time and material others on a firm contract. I would never hire the former and am leary of the latter. A contractor may low-ball a bid to get the job planning to make a killing on change orders. If you say good morning to them, they charge you extra for that. If the contract is not very, very specific and extensively fleshed out or if they display their change order schedule prominently on top, show them the door.
Disclaimer: NerdWallet strives to keep its information accurate and up to date. This information may be different than what you see when you visit a financial institution, service provider or specific product’s site. All financial products, shopping products and services are presented without warranty. When evaluating offers, please review the financial institution’s Terms and Conditions. Pre-qualified offers are not binding. If you find discrepancies with your credit score or information from your credit report, please contact TransUnion® directly.
In Mark Twain's classic "The Adventures of Tom Sawyer," Tom tricks his friends into painting his aunt's fence. You probably won't get that lucky, but there are good reasons many homeowners keep their painting in-house. No building codes apply to interior decoration; if you do something dumb, you don't risk life and property as you would if you were, say, tackling a rewiring job; and because labor typically accounts for 80 to 85 percent of the price of a paint job, you'll save a ton by doing the work yourself.
A fresh coat of paint makes everything it touches seem brand new. But such new beginnings cost real money. Professional painters charge around $4,000 for labor and materials to paint the exterior of a 2,500-square-foot, two-story home and roughly $5,500 for the interior. Painters’ rates may range from $20 to $60 an hour, but around $40 is typical in urban areas.

Once work begins, hold brief daily meetings to discuss the job and schedule and quash any misunderstandings. If there are surprises, seek middle ground. No contract can anticipate every possibility. Materials may be unavailable. Large chunks of rotten siding may crumble along with the old paint. Exterior jobs may be stopped cold by a week of steady rain. But know that you'll pay extra if you change your mind about a color after the trim is already painted or otherwise add tasks to the project.
Some proposals simply say to paint the walls and ceiling and never specify the number of coats to be applied. If the colors are similar enough, it's possible to get away with one coat of paint and not discount your pricing. No matter how hard you try, tiny, pin-sized air holes will pop exposing the original walls. This may not bother you if you can't notice it, but principally speaking you should have paid your painter less for the work.
As a painting contractor I find that most contractors charge between $20 an hour and $45 an hour plus paint and materials pending overhead here in Pennsylvania i figure $30 an hour is a safe bet. figure a good painter should be able to prep a 12 x 12 to a 12 x 15 room, caulk, apply 1 or 2 coats to the ceiling 2 coats on the walls and 1 coat on all baseboards, trim, doors and crown moulding in an 8 to 9 hour day. This is with minimal or minor spackling repairs like nail holes and nail pops, not cracks and peeling tape. Thats extra paint is usually  $30 to $70 a gallon pending quality. A room this size will need 1 gallon for the ceiling 2 for the walls and maybe 1 gallon for the trim, doors ext... the square foot price is $1.50 - $3.00 as far as asking for money up front I never ask. If the home owner buys the paint there is no need for money and if your buying the paint and your an established contractor you have an account with your supplier's.  any ways that's my input and guidelines 
×