Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate ﬂashing and texture differences.
They clearly CANNOT handle a 10+ tabletop. There were 2 of us that ordered LITERALLY at the same tim...e as everyone else, an hour and fifteen min later, two trips to the manager(to whom I do apologize for having an irate attitude towards), we FINALLY get our food. This is literally the first time I’ve come here, in actuality I’m writing this post while I’m still here. The sad part to this whole thing is that they’ll offer some type cheesy coupon to TRY to accommodate their “short comings”. First impression is a lasting one, THIS PLACE SUCKS AT THEIR FOOD SERVICE....
Recently I had the outside of my home painted. The contractor wrote a good contract, but I failed to realize that some things were not in it. It reminds me of the car dealer who offered a good price on a new car but failed to mention that it did not include tires. My contractor failed to specify that lattice under a porch was included. So the painters did not paint it. To his credit, he did instruct them to paint it when I brought it to his attention. If I had the job to do over again I would look for an individual who came with referrals from happy customers rather than a franchise owner..
A firm must amend its certification within 90 days of a change to information included in its most recent application. Examples of amendments include a change in the firm's name without transfer of ownership, or a change of address or other contact information. If a firm fails to amend its certification within 90 days of the date the change occurs, it will not be authorized to perform renovations until its certification has been amended.
I agree with JHs. If there is no new color on it at all, just talk to the painter about it, if it was an honest mistake (which can happen very easily while painting) your painter should have no problem fixing it. However, in my years of experience, it is not unusual for 2 coats of door paint (good quality) not to cover very well at all. I once painted a red door 7 times, plus a tinted prime coat before I found the door to be a solid color.
The speed with which a painter can complete the job will determine its final cost, but time is difficult to estimate. Some painters have more experience and cover a wall faster, but some are more methodical and take more time. Most painters should be able to cover about 100 to 120 square feet of flat surface in an hour, unless they are working on a very large wall. Wood or plaster might reduce that amount to 80 to 100 square feet. You should also consider the time required for a first coat to dry before a second coat may be applied. This will add time as well -- anywhere from one to 48 hours depending on the paint.