There are cases where apartment complexes allow you to choose from a color wheel of neutral hues before you move in. Some charge a fee for calling in a painter to do the walls, while others offer new paint as a benefit of moving in. If you're not a fan of neutral colors, consider looking for an apartment that allows you to paint the walls a more expressive tone. Otherwise you can invest in boldly colored furniture and posters.
I was taught to paint by a professional and when estimating the amount of paint needed, I always allow for a second coat just to make sure of coverage. We interviewed a painter who tried to tell me I bought poor quality paint without knowing where I purchased it, and stated he would have to buy all new paint. He had not seen the cans and was just guessing so I asked him where I should buy paint from now on. It was the same place I had purchased my paint and he wanted to charge me an extra 20 a gallon more than what I paid for. Needless to say, I have interviewed numerous painters and they are not all honest.
Not all people live where they can hire a painting contractor, like you describe. People who live in small towns can only hire painters who have a very small business, and do two or three paint jobs per week. In this case, you do have to be very careful, when you hire a painter, as we have several, in our area, who are out to make a fast buck anyway they can.
The cost to paint an average size room (10X12) ranges from $380-$790, not including ceilings, trim or cost of the paint. DIY, this can cost between $200-$300. When estimating the cost, painters will start with how much paint will be required to complete the job. To know this, they first need to know the size of the area to be covered. The easiest way to calculate the size of the paintable area is to add together the length of the wall and multiply it by the width of the room from floor to ceiling. The resulting amount is the room's square footage. This total is a starting point, as it is not all paintable surface. The painters won't paint the windows and doors, for example, and they must account for ceiling trim and baseboards as well. The next step is to subtract the area of the doors and windows -- along with the square footage of the trim and baseboards -- to get an average. Then, use the same calculation (length x width) on the windows, doors, trim and baseboards, and subtract all of those numbers. The result of this equation is the square footage of the room's walls. This is your surface area number. (Painters will typically add a little square footage back in to this amount to account for extra paint, which may be required.)
Time is money, so we’re committed to designing and building high-performance sprayers that maximize your productivity on the job. Over 50 years ago Graco invented the first portable airless paint sprayer, and we’ve been innovating ever since. Choose from battery, electric or gas-powered sprayers for the high performance and productivity you need to grow your business and keep you profitable.
Once preparation to your house is completed, our team will then weatherproof the exterior of your home. We ensure complete protection by securing loose paneling and siding, applying caulk wherever it is needed and oil priming all raw wood. Even the most professional paint jobs can be improved by taking time to weatherproof everything beneath the paint.
Transitioning your painting business away from these mistakes can be difficult, but I guarantee you it’s worth it. You’ll look back at your business and say, ‘How did I even operate that way?’ Once you start doing things more efficiently and reaping the benefits, you’ll be UNABLE to return to your old ways of running things. Try eliminating just 2 of these mistakes and see what happens!
Hi Richard, Thanks for reaching out. Please visit our website to browse pro reviews in those areas or submit a service request http://www.homeadvisor.com/c.html. If you would like to speak w/ a rep about your project and get assistance finding the right pro in these areas please send your contact info to firstname.lastname@example.org and someone will reach out. -HASupport
Over the past year I have had several jobs given to 2 Angie's list recommendations and 1 not from a recommendation. They all have one thing in common, lack of sufficient and correct preparation to save time, labor, and the fact that they put a person in charge that was a cut corners type of worker. The two from Angie's list sent worker/s back to try touch up problems, but once the job is not prepared correctly in the first place any extra work is like putting a band-aid on a dirty wound.
I did go with the highest bidder and it did not matter. They did a shoddy job and threatened to take me to court when I pointed out mistakes that they made based on their work standards stated on the quote. I have not paid them yet, just filed a complaint with the BBB. No money down asked, no contract signed. The boss stated I have to high of expectations just because I live in a 121 year old house!
This article with comments was terrific - it was so informative. I found the advice useful. It addressed specifics like the condition of the dry wall surfaces, any additional repairs such. pin holes, chalking, smoothing of wall surfaces, absorption of paint and number of coats that may be needed. It should also include insurance coverage, and reflect the clean-up afterwards. Having a written contract with the company's letterhead is a must.
A painting and decorating contractor prepares by scraping, sandblasting or other means and applies any of the following: paints, papers, textures, fabrics, pigments, oils, turpentines, japans, driers, thinners, varnishes, shellacs, stains, fillers, waxes, adhesives, water and any other vehicles, mediums and materials which adhere by evaporation and may be mixed, used and applied to the surfaces of structures and the appurtenances thereto for purposes of decorating, protecting, fireproofing and waterproofing.
The PREP Study is attempting to reduce isocyanate, dust and solvent exposures for autobody shop workers in Connecticut. We have produced a user-friendly DVD-based training program with a great deal of input from the autobody community. The DVD contains information for painters, autobody technicians and anyone else working around a body shop, including:
Generally, it will take a minimum of two gallons of paint to cover a room. At the highest end, paint will cost anywhere between $30 and $60 per gallon and come in three different finishes: flat, semi-gloss or high-gloss. Flat finishes are the least shiny and are best suited for areas requiring frequent cleaning. Semi-gloss finishes are a bit shiny but can also be easily cleaned. A high-gloss finish is stain-resistant and easy to clean. Traditionally, living rooms should be painted with a flat finish to allow the paint to stand out. Glossy finishes should be reserved for hallways, and a semi-gloss is best suited for trim. Invest in pre-primed paint whenever possible. This cuts down on time by combining the layering process. Almost any paint job will require a primer, which will cost anywhere from $7 to $15 per can. Primer helps the paint to stand out against the underlayer of paint it's covering, especially if the new paint is lighter than the old coat. You will need at least two cans of primer, if not more, to cover one wall. Here are some paint brands and their average price per gallon:
OF the different type of customers there are at least two: cheap charley's and people who want great results. I agree the need for wall repair is critical to the end results. Most critical is for the customer to be told ahead that the walls are going to need exactly what is needed. This means the contractor must look, touch, examine the walls for defects and needed work. I've been a building manager for 40 years and seen a few paint jobs. Typically a contractor does a lot of talking about how expert he is, but the guys who walk through with note pads, iPads, examine, measure, point things out, explain and recommend are the ones I will deal with. It confirms if they know what the business. Nobody likes the workers to show up and when you talk about the job they're going to do they know nothing but they we were told to be here. Their boss who bid the job doesn't supervise - a big no no around here. Nobody likes surprises or worse, at the end of a job that's not right getting a bunch of little kid excuses. Contractors that do not like the customer to be around looking at the progress don't get the job.
• One room or the whole house? Applying one coat in one room is a reasonable DIY Saturday project (especially if you have help and beer). Multiply the time spent moving furniture, prepping walls and sanding old trim by the number of rooms in the house, and you might want to hire real help. It's the same outside. You can probably tackle one shady garage wall that needs a little scraping and sanding plus a coat of paint, but covering all surfaces of the house is usually best left to a pro.