For years, Handy has been living up to its name by connecting busy customers with house painters. It doesn’t matter whether you live in a house or an apartment—you’re just a mouse-click away from booking top-rated residential house painters. Using Handy to find house painting services is a great way to save time and money! All you need to do is type in your zip code, enter a little information about your wall painting job, and within minutes, you’ll be connected to a top house painting professional in your area. 


Excellent advice because there are many unskilled workers who are "trying to pull the wool over the customers eyes". One has to study about the project for which they are in need. I happen to need dry wall repair and painting done in my home and feel the advice in this article will be a great help to me in hiring someone who is ethical and does good work. Thanks.
The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam.
Generally, it will take a minimum of two gallons of paint to cover a room. At the highest end, paint will cost anywhere between $30 and $60 per gallon and come in three different finishes: flat, semi-gloss or high-gloss. Flat finishes are the least shiny and are best suited for areas requiring frequent cleaning. Semi-gloss finishes are a bit shiny but can also be easily cleaned. A high-gloss finish is stain-resistant and easy to clean. Traditionally, living rooms should be painted with a flat finish to allow the paint to stand out. Glossy finishes should be reserved for hallways, and a semi-gloss is best suited for trim. Invest in pre-primed paint whenever possible. This cuts down on time by combining the layering process. Almost any paint job will require a primer, which will cost anywhere from $7 to $15 per can. Primer helps the paint to stand out against the underlayer of paint it's covering, especially if the new paint is lighter than the old coat. You will need at least two cans of primer, if not more, to cover one wall. Here are some paint brands and their average price per gallon:
Thorough preparation is essential to ensure a good finish. Contractors might have to fill cracks or holes and remove old paint if it is badly worn, peeling or flaking. They remove all paint and apply a suitable primer to the bare surface. If the existing paint is in reasonable condition, they clean it and rub it with abrasive material to provide a key for the new paint. On new surfaces, such as bare wood or fresh plaster, they apply a suitable seal, followed by a primer coat.
After our own inspection, your Job Site Supervisor will walk you through the space, giving you the opportunity to review our work and to provide any initial feedback. You may also be contacted for a follow-up satisfaction survey so that we know how we measured up to your expectations. Our paint jobs are designed to last up to 7 years on a properly maintained surface, so you will get to enjoy your beautiful newly painted room for years to come.
Painting your home, both inside and out, improves its curb appeal, character and resale value. Painting is one of the quickest and easiest ways to give your home a face-lift -- and it yields some of the most dramatic results as well. If you have ever visited the painting section of your local hardware store, you know how overwhelming the multitude of paint choices can be. In addition to colors, there are finishes, stains, maintenance and other options to consider. And, if you're interested in adding a mural or trompe l'oeil, you're looking at a whole different set of choices and associated costs.
First off, the picture on the top THAT IS A HOME OWNERS PAINT JOB. If you here a school kid or your neighbor, this is what you get. I was a painting contractor for the better part of 40 years and never saw a PAINTER (even the worst painter) leave a mess like that. Maybe the electrician or the carpenter but, that is not something a painter could even do if they tried.
I would never suggest that one of my clients buy their own paint because A . They will pay an average of $20 to $30 more per gallon which could add up to $1,000 or more to a full repaint B. most times I'm in the paint store homeowners are kind of pushed to the foreground as they handle all the contractors in the store and C. Paint is heavy, takes up a lot of room needs to be left in it clean dry area and I hate to put a client to work when they are trying to hire me to do their job.
I turn away any job when the client refuses to pay anything up front. It sends a red flag. I also charge a scheduling fee which is non-refundable. I get 33 percent when I show up and begin work. Another percentage halfway through, and the balance upon completion after client is satisfied. There needs to be skin in the game for both parties as a measure of good faith. If you are dealing with a reputable company (did your due diligence, right?) why wouldn't you want to pay something as work progresses? We do this not only because we love to paint but we require cash flow to stay in business. There is not always 'money in the bank' as you suggest. It's tough these days. The suggestion buy 'Kim' 'Never pay a contractor a deposit' is nonsensical.
Residential house painters on the Handy platform have used countless gallons of paint and tons of brushes over the years. With a wealth of experience under their belts, they know the best, quickest and most cost-effective ways to get the work done. From how to achieve that perfect glossy finish to ensuring no paint drips onto your crown molding, you might find yourself picking up a few tips!
Specialty painting by the hour costs between $40 to $50 on average. Paint might range between $75 to $90, costing an additional $40 to $50 per hour. The painter's skill and experience are also determining factors in the cost of specialty painting. While a freelance artist might charge $25 to $30 an hour, a very skilled professional might charge $80 or more. Some painters might also charge $60 or more for a consultation. Trompe l'oeils, in particular, will run on the expensive end of the price spectrum. Return to Top
We used FHP to paint the interior of our home and  were very satisfied with their work. Joe, the owner, was always available to answer any questions I had. He put up samples for us in each room so we could choose the best color. They prepped the house well and the end product was more than expected! His price was fair compared to competitors. FHP finished the project in a timely manner . He even offered to come back and touch up the paint after we have moved in ! I would recommend FHP for any job!
OF the different type of customers there are at least two: cheap charley's and people who want great results. I agree the need for wall repair is critical to the end results. Most critical is for the customer to be told ahead that the walls are going to need exactly what is needed. This means the contractor must look, touch, examine the walls for defects and needed work. I've been a building manager for 40 years and seen a few paint jobs. Typically a contractor does a lot of talking about how expert he is, but the guys who walk through with note pads, iPads, examine, measure, point things out, explain and recommend are the ones I will deal with. It confirms if they know what the business. Nobody likes the workers to show up and when you talk about the job they're going to do they know nothing but they we were told to be here. Their boss who bid the job doesn't supervise - a big no no around here. Nobody likes surprises or worse, at the end of a job that's not right getting a bunch of little kid excuses. Contractors that do not like the customer to be around looking at the progress don't get the job. 

As a former professional painter, something that drives me crazy is when I see painters cut in around wall plates. First of all, the amount of time that it takes to cut in is usually much longer than the amount of time that it takes to simply remove the wall plate. Secondly it does not look nearly as clean as it does when the wall plate is removed and thirdly it can invariably leave paint on the wall plate itself which also looks sloppy. Make sure the painter takes them off and then reinstalls them. It's less time.
You can save a bundle by doing the labor yourself. The biggest DIY expense is paint. Other expenses include buying or renting supplies and equipment, like caulk, primer, brushes, rollers, tarps and ladders or scaffolding. Freeman advises applying paint with brushes, not a sprayer. “If you overspray all the window frames and overspray your shingles and your sidewalks and the brick on the front of the house, you do damage that is not easily fixed,” he says.

Never, never hire "Hanks painting" , he is a scam. He charged me 1800 for an 800 sqft house, with the agreement of painting the gutters. He not only didn't paint the gutters, the paint of the walls and front door is pealing off. He did not sand the door and the wall color is washing off. His people don't know the work and he much less than them since he painted the door.
A GREAT Paint Contractor Presents Proof of Insurance While a good paint contractor may tell you he's insured, a GREAT contractor presents a copy of his policy, proving the amount of coverage, he carries for both property damage and bodily injury that may result from the contractor's work. By nature, paint materials are highly flammable and, should a tragedy occur, you need to know your contractor is sufficiently insured.
Lap marks are those ugly stripes caused by uneven layers of paint buildup. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute!) The key to avoiding lap marks  when doing DIY wall painting is to maintain a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint can begin to dry.

Not only careful communication is essential, but we would greatly recommend, when you pick out your type and brand of paint that you go and pay for it, with the contractor's discount, which is given by Sherwin-Williams and most paint companies. Then you will know how much paint you purchased and the coverage. If it is possible, inspect the work of the painter daily.
There are permanent features of the home that have their own colors which cannot be changed when painting the exterior of the home but can have a dramatic satisfaction level that is experienced when the painting is completed.  Roofing shingles, paving blocks, concrete surfaces, stones and other such features are prime examples of the colors that should be considered when selecting your exterior color scheme for the home.  Homeowners can work off of these colors to make a home that looks uniform and luxurious when the exterior painting is complete.
Consider purchasing supplies personally to save money. Ask the painter for a bid that separates labor and materials. Then explain that you'll purchase the materials and ask for a list of exactly what will be needed to complete the job. Caulking, for example, is an extra supply commonly used to fill any cracks or damaged areas in your walls -- and one that might be overlooked in an incomplete list.
{ "galleryConfig" : {"galleryTitle":"Videos","galleryItems":[{"id":null,"title":"Structural Repair","url":"http://vimeo.com/229142342","mediaSources":null,"description":"Hazards and proper protection while cutting, grinding, welding.","duration":"5:33","thumbnailUrl":"http://i.vimeocdn.com/video/649374900_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOiUDl4xTsMb8+0quFv997QgNdWvZz2Mbmg8j7OjOgbVQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGP+jFPOyZ3ee6DwfQI8JX24ZFxnZmPEyIqLsTlFciGOsw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Surface Preparation","url":"http://vimeo.com/229114680","mediaSources":null,"description":"Sanding, body filler, solvent wipe down, masking.","duration":"5:30","thumbnailUrl":"http://i.vimeocdn.com/video/649340426_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMPQ/0SzwNC3qxmyzA8rh00JfmhCsY9z0rrOPlnSeOSvA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMqwTDDrdISKJcoFG8R0GddY6B6Mr2/EiEafjBSbL0SbQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Painting","url":"http://vimeo.com/229184542","mediaSources":null,"description":"Mixing coatings, spraying paint, gun cleaning, unmasking.","duration":"12:37","thumbnailUrl":"http://i.vimeocdn.com/video/649429175_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNhkGLICbyNlpZf/0EhR5YbWUtqEe8183loncNEzZwGsA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNJ2dENagcj+OrbkimC85zy6ras5C1T9u1nBUl9fGxnYg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Overview)","url":"http://vimeo.com/229115324","mediaSources":null,"description":"Choosing the best type respirator for your tasks, fit testing","duration":"03:49","thumbnailUrl":"http://i.vimeocdn.com/video/649341202_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNtImajjNHe6jARBiHcD6VuepuJy0zv0FvKpqmb8JUNRg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOSyvZoO5VShIctdMhYrO1ZSYUXz4tfP32j02f90eXfFw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Cleaning and Storage)","url":"http://vimeo.com/228865270","mediaSources":null,"description":"How to clean and maintain your respirator.","duration":"1:46","thumbnailUrl":"http://i.vimeocdn.com/video/649027412_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf4nf0pOeIZcw+VAfgeGBpy0AaSxT7b2QvnLKXY3ZpVyuQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf6dcUZO3dHOxWIvJ+SgFrwgcao7j60JKvPDJahmfVir4Q== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Donning a Half Mask Respirator) ","url":"http://vimeo.com/229146171","mediaSources":null,"description":"Putting on (donning) and fitting a respirator, pressure checks.","duration":"1:57","thumbnailUrl":"http://i.vimeocdn.com/video/649379748_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMkSWDfi0it7h5AX6KfLIovgb+7GyvMtXXt34r9qBjDXQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNa9+q+2lXYwFigwR5wFjtuqcyyAuBkZmAv86gMxzrunQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Chemical Resistant Gloves","url":"http://vimeo.com/228970893","mediaSources":null,"description":"Gloves to protect against solvents, isocyanates and dusts","duration":"02:23","thumbnailUrl":"http://i.vimeocdn.com/video/649161993_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8hjG/6VSgBBA23GFpzQ5vrSEdT1sdNAWrIfRJelqOAEQg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8iVC8uiDwyTy73nbFlsCCU1jmdouKKtJvd5XCoIF3RLrg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Isocyanate Health Hazards","url":"http://vimeo.com/229123604","mediaSources":null,"description":"Isocyanates can cause asthma and airway irritation .","duration":"6:06","thumbnailUrl":"http://i.vimeocdn.com/video/649351377_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGM+LTxO7+opIKVkifEOFsC6cAa7qyBAOoTwcZcKylUeIQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNToiixt8ivhkn14FvljjLq4oFgFgi/rZZhhOSDo3Qe5A== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Solvent Health Hazards","url":"http://vimeo.com/229167358","mediaSources":null,"description":"Effects of solvent exposure: skin, nervous system, liver, etc.","duration":"03:26","thumbnailUrl":"http://i.vimeocdn.com/video/649407194_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BePhRTr7dbZIdQdP6K/RHlVvJZ33hOEbslHHahu2n/+qzQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeMUXLf4Bhuxq/WQ0stgUJ8ofKafv4dkRuhy+ly27/70MQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Sources of Information","url":"http://vimeo.com/228865887","mediaSources":null,"description":"MSDSs, routes of exposure, signs and symptoms of exposure","duration":"03:30","thumbnailUrl":"http://i.vimeocdn.com/video/649028172_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf5/d77jNMgv0uxh2lleucWIelZHfuxL/Y9qMtSOvx87sA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf60tYR5hWn95e5+iSGICXG5Ty9pruywoJUwZiJy1iK/lQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0}],"itemsToLoadIds":[],"slideRowsCount":0}, "displayStyle": "video-gallery-widget" }
At Five Star Painting, we offer free price estimates, so there’s no reason to hesitate! Our house painting contractors know what they’re doing, and they do it well! Call our residential painting experts today at (888) 261-3633 to receive your free estimate or to schedule a home visit. Use our online scheduler to pick the date and time of your consultation.
basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50.  Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story. 
×