Your home is your most important asset and maintaining it is vital in upholding and increasing its value. As a full-service painting company, Home Works Painting will provide you with a superior professional painting experience. Our services include interior/exterior painting, drywall repair/installation, wood replacement, pressure washing, and color consulting. We stand behind our work by offering a six year warranty.

Recently I had the outside of my home painted. The contractor wrote a good contract, but I failed to realize that some things were not in it. It reminds me of the car dealer who offered a good price on a new car but failed to mention that it did not include tires. My contractor failed to specify that lattice under a porch was included. So the painters did not paint it. To his credit, he did instruct them to paint it when I brought it to his attention. If I had the job to do over again I would look for an individual who came with referrals from happy customers rather than a franchise owner..


Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.
I was taught to paint by a professional and when estimating the amount of paint needed, I always allow for a second coat just to make sure of coverage. We interviewed a painter who tried to tell me I bought poor quality paint without knowing where I purchased it, and stated he would have to buy all new paint. He had not seen the cans and was just guessing so I asked him where I should buy paint from now on. It was the same place I had purchased my paint and he wanted to charge me an extra 20 a gallon more than what I paid for. Needless to say, I have interviewed numerous painters and they are not all honest.
Paint gets more expensive as you go from flat to gloss. The difference is usually around $1 per gallon per sheen upgrade. Flat is the cheapest, then matte flat or eggshell, satin, semigloss then gloss. Paint also gets much more expensive the darker it gets. A white or neutral paint color can be as much as $20 less expensive than a deep base red or blue.
The cost to paint an average size room (10X12) ranges from $380-$790, not including ceilings, trim or cost of the paint. DIY, this can cost between $200-$300. When estimating the cost, painters will start with how much paint will be required to complete the job. To know this, they first need to know the size of the area to be covered. The easiest way to calculate the size of the paintable area is to add together the length of the wall and multiply it by the width of the room from floor to ceiling. The resulting amount is the room's square footage. This total is a starting point, as it is not all paintable surface. The painters won't paint the windows and doors, for example, and they must account for ceiling trim and baseboards as well. The next step is to subtract the area of the doors and windows -- along with the square footage of the trim and baseboards -- to get an average. Then, use the same calculation (length x width) on the windows, doors, trim and baseboards, and subtract all of those numbers. The result of this equation is the square footage of the room's walls. This is your surface area number. (Painters will typically add a little square footage back in to this amount to account for extra paint, which may be required.)

© 2018 Condé Nast. All rights reserved. Use of and/or registration on any portion of this site constitutes acceptance of our User Agreement (updated 5/25/18) and Privacy Policy and Cookie Statement (updated 5/25/18). Your California Privacy Rights. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Condé Nast. Ad Choices. CN Entertainment.
I was a painting contractor for many years and never asked for a deposit upfront. A good contractor should have great credit with his suppliers and an even better contract if the deal should go south before the job is done. Get to know your customer and explain how each paint covers so they understand fully before you have to apply 3 or 4 coats. If you didn't bid your job right and the client has already signed the contract then that is on you not the client. Yes I haven had to eat the difference but the client was happy and a return customer for years so I made up for it.
Wilson & Hampton provides the premier system for coating metal surfaces. Electrostatic painting is an efficient process where you can upgrade and rejuvenate your entire office or factory area in your choice of finishes at a fraction of the re-placement cost. Cabinets, lockers, machinery, Bathroom Partitions and much more can be painted in-shop or on-site by drawing the paint directly to the metal surface to be painted and “wrapping” around it, leaving no drips, spatter, or over spray.

This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.


Lap marks are those ugly stripes caused by uneven layers of paint buildup. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute!) The key to avoiding lap marks  when doing DIY wall painting is to maintain a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint can begin to dry.

We had a bad experience with an interior painter years ago, with the crux of the problem being him overcharging us at the end for "extra work" he didn't anticipate. One thing I'd strongly recommend is making sure it's in the contract that any additional work or growth work is estimated and communicated to the owner as soon as it is identified, otherwise the owner is not liable to pay it at the end.

Climate is another factor to consider. Sunlight, wind, rain and salty weather can all wear out exterior paint. Oil-based paint is durable against wind, rain and temperature changes, but sunlight tends to degrade it. Alkyd paint chalks and sheds very thin layers when it begins to wear. Latex paint is the more durable option for very sun-drenched and relatively dry climate areas. Latex paint with high vinyl content should be avoided, however. Acrylic resin is by far the more durable binder for outdoor latex paint.
basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50.  Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story. 
We used FHP to paint the interior of our home and  were very satisfied with their work. Joe, the owner, was always available to answer any questions I had. He put up samples for us in each room so we could choose the best color. They prepped the house well and the end product was more than expected! His price was fair compared to competitors. FHP finished the project in a timely manner . He even offered to come back and touch up the paint after we have moved in ! I would recommend FHP for any job!
If you decide to hire help, have several contractors inspect the job and provide proposals. You'll probably find huge price differences for the same job. A Checkbook undercover shopper got quotes from nine Washington-area contractors to repaint the walls, ceiling and trim for a living room, dining room, family room, bathroom and kitchen. Including paint and supplies, prices ranged from $2,650 or less to more than $6,500.
{ "galleryConfig" : {"galleryTitle":"Videos","galleryItems":[{"id":null,"title":"Structural Repair","url":"http://vimeo.com/229142342","mediaSources":null,"description":"Hazards and proper protection while cutting, grinding, welding.","duration":"5:33","thumbnailUrl":"http://i.vimeocdn.com/video/649374900_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOiUDl4xTsMb8+0quFv997QgNdWvZz2Mbmg8j7OjOgbVQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGP+jFPOyZ3ee6DwfQI8JX24ZFxnZmPEyIqLsTlFciGOsw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Surface Preparation","url":"http://vimeo.com/229114680","mediaSources":null,"description":"Sanding, body filler, solvent wipe down, masking.","duration":"5:30","thumbnailUrl":"http://i.vimeocdn.com/video/649340426_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMPQ/0SzwNC3qxmyzA8rh00JfmhCsY9z0rrOPlnSeOSvA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMqwTDDrdISKJcoFG8R0GddY6B6Mr2/EiEafjBSbL0SbQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Painting","url":"http://vimeo.com/229184542","mediaSources":null,"description":"Mixing coatings, spraying paint, gun cleaning, unmasking.","duration":"12:37","thumbnailUrl":"http://i.vimeocdn.com/video/649429175_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNhkGLICbyNlpZf/0EhR5YbWUtqEe8183loncNEzZwGsA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNJ2dENagcj+OrbkimC85zy6ras5C1T9u1nBUl9fGxnYg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Overview)","url":"http://vimeo.com/229115324","mediaSources":null,"description":"Choosing the best type respirator for your tasks, fit testing","duration":"03:49","thumbnailUrl":"http://i.vimeocdn.com/video/649341202_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNtImajjNHe6jARBiHcD6VuepuJy0zv0FvKpqmb8JUNRg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOSyvZoO5VShIctdMhYrO1ZSYUXz4tfP32j02f90eXfFw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Cleaning and Storage)","url":"http://vimeo.com/228865270","mediaSources":null,"description":"How to clean and maintain your respirator.","duration":"1:46","thumbnailUrl":"http://i.vimeocdn.com/video/649027412_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf4nf0pOeIZcw+VAfgeGBpy0AaSxT7b2QvnLKXY3ZpVyuQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf6dcUZO3dHOxWIvJ+SgFrwgcao7j60JKvPDJahmfVir4Q== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Donning a Half Mask Respirator) ","url":"http://vimeo.com/229146171","mediaSources":null,"description":"Putting on (donning) and fitting a respirator, pressure checks.","duration":"1:57","thumbnailUrl":"http://i.vimeocdn.com/video/649379748_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMkSWDfi0it7h5AX6KfLIovgb+7GyvMtXXt34r9qBjDXQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNa9+q+2lXYwFigwR5wFjtuqcyyAuBkZmAv86gMxzrunQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Chemical Resistant Gloves","url":"http://vimeo.com/228970893","mediaSources":null,"description":"Gloves to protect against solvents, isocyanates and dusts","duration":"02:23","thumbnailUrl":"http://i.vimeocdn.com/video/649161993_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8hjG/6VSgBBA23GFpzQ5vrSEdT1sdNAWrIfRJelqOAEQg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8iVC8uiDwyTy73nbFlsCCU1jmdouKKtJvd5XCoIF3RLrg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Isocyanate Health Hazards","url":"http://vimeo.com/229123604","mediaSources":null,"description":"Isocyanates can cause asthma and airway irritation .","duration":"6:06","thumbnailUrl":"http://i.vimeocdn.com/video/649351377_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGM+LTxO7+opIKVkifEOFsC6cAa7qyBAOoTwcZcKylUeIQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNToiixt8ivhkn14FvljjLq4oFgFgi/rZZhhOSDo3Qe5A== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Solvent Health Hazards","url":"http://vimeo.com/229167358","mediaSources":null,"description":"Effects of solvent exposure: skin, nervous system, liver, etc.","duration":"03:26","thumbnailUrl":"http://i.vimeocdn.com/video/649407194_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BePhRTr7dbZIdQdP6K/RHlVvJZ33hOEbslHHahu2n/+qzQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeMUXLf4Bhuxq/WQ0stgUJ8ofKafv4dkRuhy+ly27/70MQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Sources of Information","url":"http://vimeo.com/228865887","mediaSources":null,"description":"MSDSs, routes of exposure, signs and symptoms of exposure","duration":"03:30","thumbnailUrl":"http://i.vimeocdn.com/video/649028172_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf5/d77jNMgv0uxh2lleucWIelZHfuxL/Y9qMtSOvx87sA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf60tYR5hWn95e5+iSGICXG5Ty9pruywoJUwZiJy1iK/lQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0}],"itemsToLoadIds":[],"slideRowsCount":0}, "displayStyle": "video-gallery-widget" }

Home Painter Company

×