When coverage is difficult to estimate, add more rather than less when doing DIY wall painting. You can always pour the leftover back into cans. For large jobs, use the bucket and a roller screen rather than a roller tray. It’s much faster to load your roller with the screen than to use a roller pan. Simply dunk the roller into the paint bucket, then roll it along the screen until it stops dripping.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.

With that said, here's the reality of that particular scenario. Painters do put water in the paint, but not for reasons you would think. Some materials need to have their viscosity manipulated in order to slow drying time, allowing gravity to 'smooth' out the product for a better finish. It also prevents 'drags' and 'sausages'. I personally try not to do it too often, but from time to time I have to. I want my client to have a proper finish.
When I had my interior painting done, after clearing out all of the furniture, myself, I also removed all of the wall plates in all the rooms to be painted. They were a beige color and probably yellowed. The wall was originally an off white and I had it painted a light-mid grey, so those wall plates would look terrible. After pricing replacement plates, switches and outlets (Would have been way too expensive to replace all of them), I decided to just paint all of the wall plates, switches and outlets (Used just a black gloss spray paint). I sprayed the plates outside and used a small brush on the switches and outlets. It worked out just fine and the blacks plates, etc compliment the wall color. It has been 7 years and the plates, switches, outlets are holding up well.

First off, the picture on the top THAT IS A HOME OWNERS PAINT JOB. If you here a school kid or your neighbor, this is what you get. I was a painting contractor for the better part of 40 years and never saw a PAINTER (even the worst painter) leave a mess like that. Maybe the electrician or the carpenter but, that is not something a painter could even do if they tried.
Note: Refunds will only be made after EPA verifies fee receipt and deposit by the U.S. Treasury. Firms must notify the Agency in writing in order to qualify for a refund. The date of withdrawal is the date on which the Agency received the withdrawal notification. EPA will not refund fees after granting a firm certification or re-certification. If your application is disapproved, EPA will not refund fees. Refunds are not available for replacing a certificate. Refund and withdrawal requests must be sent to the following address:
This article is outdated. Deep based colors were an increase in price back in the 90's. Most stores have a standard price for all colors now. The problems the author are citing are outdated and rarely happen. This is the 2nd time I've seen this article being emailed out, it's irresponsible of angies list to keep sending out this poorly written and inaccurate article.
The cost to paint an average size room (10X12) ranges from $380-$790, not including ceilings, trim or cost of the paint. DIY, this can cost between $200-$300. When estimating the cost, painters will start with how much paint will be required to complete the job. To know this, they first need to know the size of the area to be covered. The easiest way to calculate the size of the paintable area is to add together the length of the wall and multiply it by the width of the room from floor to ceiling. The resulting amount is the room's square footage. This total is a starting point, as it is not all paintable surface. The painters won't paint the windows and doors, for example, and they must account for ceiling trim and baseboards as well. The next step is to subtract the area of the doors and windows -- along with the square footage of the trim and baseboards -- to get an average. Then, use the same calculation (length x width) on the windows, doors, trim and baseboards, and subtract all of those numbers. The result of this equation is the square footage of the room's walls. This is your surface area number. (Painters will typically add a little square footage back in to this amount to account for extra paint, which may be required.)
As a full service industrial & commercial painting contractor servicing the Los Angeles, Orange, San Diego and Riverside counties, our expertise in commercial & industrial painting is wide ranging and our commitment to safety, environmental and industry standards is second to none. Wilson & Hampton Painting Contractors can handle elaborate painting projects with finesse like Disney’s California Adventure Resort, Angel Stadium's 'Big A', the Los Angeles Grand Hotel, UCI Medical Center, and churches across the nation, as well as industrial and municipal painting projects like water towers, hospitals and schools.
{ "galleryConfig" : {"galleryTitle":"Videos","galleryItems":[{"id":null,"title":"Structural Repair","url":"http://vimeo.com/229142342","mediaSources":null,"description":"Hazards and proper protection while cutting, grinding, welding.","duration":"5:33","thumbnailUrl":"http://i.vimeocdn.com/video/649374900_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOiUDl4xTsMb8+0quFv997QgNdWvZz2Mbmg8j7OjOgbVQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGP+jFPOyZ3ee6DwfQI8JX24ZFxnZmPEyIqLsTlFciGOsw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Surface Preparation","url":"http://vimeo.com/229114680","mediaSources":null,"description":"Sanding, body filler, solvent wipe down, masking.","duration":"5:30","thumbnailUrl":"http://i.vimeocdn.com/video/649340426_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMPQ/0SzwNC3qxmyzA8rh00JfmhCsY9z0rrOPlnSeOSvA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMqwTDDrdISKJcoFG8R0GddY6B6Mr2/EiEafjBSbL0SbQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Painting","url":"http://vimeo.com/229184542","mediaSources":null,"description":"Mixing coatings, spraying paint, gun cleaning, unmasking.","duration":"12:37","thumbnailUrl":"http://i.vimeocdn.com/video/649429175_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNhkGLICbyNlpZf/0EhR5YbWUtqEe8183loncNEzZwGsA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNJ2dENagcj+OrbkimC85zy6ras5C1T9u1nBUl9fGxnYg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Overview)","url":"http://vimeo.com/229115324","mediaSources":null,"description":"Choosing the best type respirator for your tasks, fit testing","duration":"03:49","thumbnailUrl":"http://i.vimeocdn.com/video/649341202_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNtImajjNHe6jARBiHcD6VuepuJy0zv0FvKpqmb8JUNRg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOSyvZoO5VShIctdMhYrO1ZSYUXz4tfP32j02f90eXfFw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Cleaning and Storage)","url":"http://vimeo.com/228865270","mediaSources":null,"description":"How to clean and maintain your respirator.","duration":"1:46","thumbnailUrl":"http://i.vimeocdn.com/video/649027412_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf4nf0pOeIZcw+VAfgeGBpy0AaSxT7b2QvnLKXY3ZpVyuQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf6dcUZO3dHOxWIvJ+SgFrwgcao7j60JKvPDJahmfVir4Q== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Donning a Half Mask Respirator) ","url":"http://vimeo.com/229146171","mediaSources":null,"description":"Putting on (donning) and fitting a respirator, pressure checks.","duration":"1:57","thumbnailUrl":"http://i.vimeocdn.com/video/649379748_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMkSWDfi0it7h5AX6KfLIovgb+7GyvMtXXt34r9qBjDXQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNa9+q+2lXYwFigwR5wFjtuqcyyAuBkZmAv86gMxzrunQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Chemical Resistant Gloves","url":"http://vimeo.com/228970893","mediaSources":null,"description":"Gloves to protect against solvents, isocyanates and dusts","duration":"02:23","thumbnailUrl":"http://i.vimeocdn.com/video/649161993_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8hjG/6VSgBBA23GFpzQ5vrSEdT1sdNAWrIfRJelqOAEQg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8iVC8uiDwyTy73nbFlsCCU1jmdouKKtJvd5XCoIF3RLrg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Isocyanate Health Hazards","url":"http://vimeo.com/229123604","mediaSources":null,"description":"Isocyanates can cause asthma and airway irritation .","duration":"6:06","thumbnailUrl":"http://i.vimeocdn.com/video/649351377_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGM+LTxO7+opIKVkifEOFsC6cAa7qyBAOoTwcZcKylUeIQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNToiixt8ivhkn14FvljjLq4oFgFgi/rZZhhOSDo3Qe5A== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Solvent Health Hazards","url":"http://vimeo.com/229167358","mediaSources":null,"description":"Effects of solvent exposure: skin, nervous system, liver, etc.","duration":"03:26","thumbnailUrl":"http://i.vimeocdn.com/video/649407194_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BePhRTr7dbZIdQdP6K/RHlVvJZ33hOEbslHHahu2n/+qzQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeMUXLf4Bhuxq/WQ0stgUJ8ofKafv4dkRuhy+ly27/70MQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Sources of Information","url":"http://vimeo.com/228865887","mediaSources":null,"description":"MSDSs, routes of exposure, signs and symptoms of exposure","duration":"03:30","thumbnailUrl":"http://i.vimeocdn.com/video/649028172_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf5/d77jNMgv0uxh2lleucWIelZHfuxL/Y9qMtSOvx87sA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf60tYR5hWn95e5+iSGICXG5Ty9pruywoJUwZiJy1iK/lQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0}],"itemsToLoadIds":[],"slideRowsCount":0}, "displayStyle": "video-gallery-widget" }
FIRST: Unless you can stay in business painting 1 bedroom at a time for $500-$1000, which you can't, then you will be taking on several thousand dollar contracts that require thousands in Labor and Materials to fulfill the order. Multiply that by 3-4 jobs at one time or in our case 15-20 jobs at a time, YOU NEED TO TAKE DEPOSITS!!! It is horrible business not to take deposits. There are many jobs where its not possible to get a deposit and that is built into or pricing accordingly. If we are not getting a deposit, there is a finance charge built in, contractors are not banks. If you don't have a good feeling about a deposit, your hiring the WRONG CONTRACTOR. Hire people you know or well established businesses.
Payment. Every client is different. Every job has it's own unique set of circumstances. I always start off the discussion with my clients saying that I'm flexible on how they would like to proceed with payments but that I prefer half down. I refuse to change order. Change orders are my last resort. Instead I ask questions at our initial meeting and try to be sure to cover all bases before I submit my estimate.
The speed with which a painter can complete the job will determine its final cost, but time is difficult to estimate. Some painters have more experience and cover a wall faster, but some are more methodical and take more time. Most painters should be able to cover about 100 to 120 square feet of flat surface in an hour, unless they are working on a very large wall. Wood or plaster might reduce that amount to 80 to 100 square feet. You should also consider the time required for a first coat to dry before a second coat may be applied. This will add time as well -- anywhere from one to 48 hours depending on the paint.
When you’re ready to tackle your next paint project, we offer an amazing choice of colors from top paint brands, at the best price, and expert know-how to help you do the job right. Start outside by taking an inventory of your siding and trim. If your paint is fading or peeling off your siding, start the prep work by repairing the siding and trim with some waterproof patching compound. Once dry, sand and apply primer. Then, repaint those areas until your exterior looks fresh and clean.

Once work begins, hold brief daily meetings to discuss the job and schedule and quash any misunderstandings. If there are surprises, seek middle ground. No contract can anticipate every possibility. Materials may be unavailable. Large chunks of rotten siding may crumble along with the old paint. Exterior jobs may be stopped cold by a week of steady rain. But know that you'll pay extra if you change your mind about a color after the trim is already painted or otherwise add tasks to the project.
Over 60 years ago, Graco invented the first portable airless paint sprayer and we’ve been innovating ever since to deliver the high performance and maximum productivity you need to grow your business. Whether you’re a contractor focused on small residential or a large contractor tackling the biggest projects every day, we have a configuration that’s designed to meet your needs. Graco airless sprayers are designed and built in the United States of America using the highest-quality parts and backed by the industry’s leading warranty. All Graco sprayers are 100% factory-tested and field-proven so you can be sure your money is going toward the best professional paint sprayer you can purchase.
Skip the do-overs and pick the perfect paint color the first time around. No matter what space, shade, or aesthetic you're looking for, we've got ideas. And then we've got some more ideas. We compiled all our best paint color advice in one place to make it even easier. By the time you're done with this story, you'll have your paint woes all solved.
Over the past year I have had several jobs given to 2 Angie's list recommendations and 1 not from a recommendation. They all have one thing in common, lack of sufficient and correct preparation to save time, labor, and the fact that they put a person in charge that was a cut corners type of worker. The two from Angie's list sent worker/s back to try touch up problems, but once the job is not prepared correctly in the first place any extra work is like putting a band-aid on a dirty wound.

I had florida home painters paint my tri level. Joe is a nice guy and owner who quoted the job. He was very helpful and gave us a paint sample book to choose from. He help to suggest colors for the patio floors which was a nice compliment to the color of the house.  His crew was fast and clean during the painting process. They used quality sherwin Williams paint the whole experience was great i would recommend checking them out for a quote
Ask companies to include all details in writing. Although that sounds simple enough, too many contractors submit offers such as "paint house for $5,000." A friendly contractor may offer a reassuring handshake and promise that the crew will take care of all the details — starting on time, working every day, cleaning up, etc. That's great, but why not include each point in the proposal? If it's a challenge to get a written description of labor, materials and other details, things will probably get worse when the work starts.
It is often necessary to have a rental property painted -- whether it's to make it your own before you move in or to clean it up for someone new when you move out. Some buildings and landlords have pre-selected painters, while others will contract companies to paint on an as-needed basis. If your landlord or building doesn't have a pre-selected painter, see if you may be allowed to paint the walls yourself. If you're moving in and selecting a non-neutral color, understand that your landlord may require you to repaint the walls the original color when you move out -- and ensure that you're ready to make that investment down the road.
The Lead Renovation, Repair and Painting (RRP) Rule establishes requirements for firms and individuals performing renovations, and affects contractors, property managers, and others who disturb painted surfaces.  It applies to work in houses, apartments, and child-occupied facilities (such as schools and day-care centers) built before 1978.  It includes pre-renovation education requirements as well as training, firm certification, and work practice requirements. 
I would never suggest that one of my clients buy their own paint because A . They will pay an average of $20 to $30 more per gallon which could add up to $1,000 or more to a full repaint B. most times I'm in the paint store homeowners are kind of pushed to the foreground as they handle all the contractors in the store and C. Paint is heavy, takes up a lot of room needs to be left in it clean dry area and I hate to put a client to work when they are trying to hire me to do their job.

I did go with the highest bidder and it did not matter. They did a shoddy job and threatened to take me to court when I pointed out mistakes that they made based on their work standards stated on the quote. I have not paid them yet, just filed a complaint with the BBB. No money down asked, no contract signed. The boss stated I have to high of expectations just because I live in a 121 year old house!
to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.
Note: Refunds will only be made after EPA verifies fee receipt and deposit by the U.S. Treasury. Firms must notify the Agency in writing in order to qualify for a refund. The date of withdrawal is the date on which the Agency received the withdrawal notification. EPA will not refund fees after granting a firm certification or re-certification. If your application is disapproved, EPA will not refund fees. Refunds are not available for replacing a certificate. Refund and withdrawal requests must be sent to the following address:
After our own inspection, your Job Site Supervisor will walk you through the space, giving you the opportunity to review our work and to provide any initial feedback. You may also be contacted for a follow-up satisfaction survey so that we know how we measured up to your expectations. Our paint jobs are designed to last up to 7 years on a properly maintained surface, so you will get to enjoy your beautiful newly painted room for years to come.

This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.
the price can always be adjusted based on on or off season, amount of colors to be used. A job like this can be done in 2 days and much quicker with a helper. I charge a bit more than others just because its quality work done professionally. Theres others that charge more than this just because they can on the on season and most people dont get a 2nd bid...

© 2018 Condé Nast. All rights reserved. Use of and/or registration on any portion of this site constitutes acceptance of our User Agreement (updated 5/25/18) and Privacy Policy and Cookie Statement (updated 5/25/18). Your California Privacy Rights. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Condé Nast. Ad Choices. CN Entertainment.


to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.
Contractors working in these states: Alabama, Delaware, Georgia, Iowa, Kansas, Massachusetts, Mississippi, North Carolina, Oklahoma, Oregon, Rhode Island, Utah, Washington, and Wisconsin, or in the Bois Forte Tribe should follow the link provided for the state or tribe for more information about their training and certification requirements. These states are authorized to administer their own RRP programs in lieu of the federal program. By following the state links above, you will leave the EPA web site. Note that if you work in more than one state, you may need both EPA and state certification.
Did you even read the article? It was specifying UNSCRUPULOUS painters! And, by the way, the photo at the top was not identified at all. How would anyone know whether it was done by a homeowner or not? Also did you ever stop to think that if a consumer has the knowlege to spot a dishonest contractor then by default he also has the knowlege to identify an honest one as well? And, pardon me, but just because you've never seen something has absolutely nothing to do with whether it has actually happened to someone else. Why would any honest business person be so defensive about the publishing of such useful information? If any painters/painting contractors object to a consumer having this kind of information maybe they are the dishonest ones!
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
When you hire Helena College Pro House Painters to paint the exterior of your home, you can feel good for several reasons. First, you will be saving money. Other professional painting companies charge hundreds of dollars more than Helena College Pro. You don’t have to worry about our House Painters skimping on quality because we train them in every step of the painting process. We pressure wash, scrape, caulk, and prime before we even dip our brushes in the paint. Second, you are supporting the young and bright entrepreneurs that go to school in your city. These are the best and brightest of their class, these House Painters are looking for a chance to develop their business management skills while earning money. Third, you are improving the look of your community by increasing the value of your home with a fresh coat of paint. Give Helena College Pro a call today!
As a former professional painter, something that drives me crazy is when I see painters cut in around wall plates. First of all, the amount of time that it takes to cut in is usually much longer than the amount of time that it takes to simply remove the wall plate. Secondly it does not look nearly as clean as it does when the wall plate is removed and thirdly it can invariably leave paint on the wall plate itself which also looks sloppy. Make sure the painter takes them off and then reinstalls them. It's less time.
After any areas repaired in the previous step are primed, we apply premium quality paints for a uniform finish. There are multiple finish options, including flat, matte, eggshell, satin, semi-gloss, and high-gloss, and we will have gone over the benefits of each with you beforehand so you can make an informed decision. The time will vary depending on the size of the job, but we will always ensure to work as quickly and efficiently as possible.
I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.

Residential house painters on the Handy platform have used countless gallons of paint and tons of brushes over the years. With a wealth of experience under their belts, they know the best, quickest and most cost-effective ways to get the work done. From how to achieve that perfect glossy finish to ensuring no paint drips onto your crown molding, you might find yourself picking up a few tips!
This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.
×