Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.

To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
Remember: You want to get the highest quality paint your budget will allow to ensure its lasting beauty. You'll also need painting supplies like primer, brushes, rollers and painter's tape. A professional will have these items on-hand. According to statistics, paint and other supplies account for about 15 percent of a professional painter's total cost; labor will factor into 85 percent of their charges.

Yes the pricing does change, and quite significantly. I have worked inside the paint industry on counter sales outside sales and application for over 10 years. One thing many people do not understand is, the resins in the paint are more expensive to produce the higher the sheen goes. Therefore the company is at of higher cost making the paint, which in terms they charge more for the paint. I have seen a 15$ variance between flat-semi-gloss it is not uncommon and is not unrealistic to pay more for a higher sheen. Another thing to add is when doing samples on your wall prior to a painter coming is a good idea, however do not do them in huge squares with heavy coats, remember you are just wanting an idea. A lot of times the issue comes up of the paint not covering the sample coats, in fact it is covering quite well, however the paint sample applied is often times much darker than the wall color, creating a contrasting difference from the lighter surrounding wall and the sample placed on the wall. I recommend getting a piece of sheet rock and using it for the samples so you can move around with it etc.

To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.


I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
My painter franchisee, who I got from Angie's List, must have found some shmucks on the corner to paint my house. I specifically said I wanted stain. First my house was painted the wrong color, Then it was painted with LATEX paint- not stain. Estimates to 'undo' the damage is around $10,000 and its not a guarantee that it will work. The work is at best amateurish. Many underpainted or not painted spots, drips, etc. They did the entire outside (scraping?, priming? caulking?, painting), cleaned up and left within the time I left for work and came home. There were thee of them (my neighbor told me) This was two years ago and I am still upset. Can't be fixed.
I disagree with your criteria to hire a painter. A prompt returned call is nice but does not indicate the quality or fairness of the painter. As far as a written estimate, that should be more of a qualifier for the bid versus an evaluation criterion. I'm not sure one would have favorable results by hiring a painter on this basis. As far as the bidding process, change orders should ONLY be used if the customer requests additional scope (PMP 101). Angie's list should consider asking reviewers if/how much they were told to pay compared with the estimate. Unfortunately, there are a lot of contractors that are unethical and need to be accountable.
The article was well-intended, but it makes it sound like painters are the crooks and consumers are innocent victims. That is blatantly un-true. Maybe there should be a follow-up article that educates consumers how not to be shysters by expecting a ton more than they said at the start, or not paying the balance of the job unless something else is done that was not in the contract. Tradesmen have a rough road when dealing with consumers that have short arms but long lists of by-the-way items. No, I'm not a painter...
The speed with which a painter can complete the job will determine its final cost, but time is difficult to estimate. Some painters have more experience and cover a wall faster, but some are more methodical and take more time. Most painters should be able to cover about 100 to 120 square feet of flat surface in an hour, unless they are working on a very large wall. Wood or plaster might reduce that amount to 80 to 100 square feet. You should also consider the time required for a first coat to dry before a second coat may be applied. This will add time as well -- anywhere from one to 48 hours depending on the paint.
Sorry it is difficult to trust almost anyone in the trades. It is easier to do the work myself and not deal with strangers in and around my house. When I have to hire someone I tell them up front that I'll be checking every detail, pay extra to purchase the materials myself, and if they don't want the job - well good! I always fine someone who will work with me as I pay a bonus for that.
Welcome to Repairs and Paints! We are your Top Rated Local® interior and exterior pro painters. In fact, we were voted the best residential painters of 2017. For over 15 years, we have been providing homeowners and business owners with top of the line interior and exterior painting. No matter how large, or small your professional painting needs are, Repairs and Paints has got you covered. Our professional painting staff is reliable, timely, experienced, and affordable. Simply pick your color(s) and watch our experienced staff strategically paint your home interior.
For interior paint I prefer the semi-gloss, provides a very subtle sheen and is super easy to clean -no flaking, chipping, etc. I've painted a lot, and found that Sherwin Williams Ovation paint has been the easiest to use, and provides the best coverage. I even painted my ceilings with it and WOW! I was done it no time at all, with perfect coverage.

"There's wisdom in a multitude of counsel" {Bible Book of Wisdom/Proverbs} I thank you all I learned so much here not only painting but contracting in general. After all this I realize how blessed my ignorance not taken advantage of by Greater Philadelphia area motivated young skilled pride-in-work honest hardworking + seasoned older employee of Scott Gribling Painting of Lansdale PA. I'm proud I had the idea that Tom Parkinson here taught me the phrase & affirmed paying daily "progress draws" & purchase receipts instead of advance deposit in case something happens to contractor, and as Tom teaches the natural effectiveness of receiving from the day's work :)
One of the fastest, most effective ways to personalize your living space is with color. Bright, muted, cheerful, elegant—whatever your mood, personality, or preference might be, there’s a paint color to match! Our local Five Star Painting teams specialize in making houses feel like homes through interior and exterior home painting services. If you're looking to transform your home, it's time to contact Five Star Painting. Call (888) 261-3633 for a free estimate, or schedule an appointment online. Let us help you paint your world!

Note: Refunds will only be made after EPA verifies fee receipt and deposit by the U.S. Treasury. Firms must notify the Agency in writing in order to qualify for a refund. The date of withdrawal is the date on which the Agency received the withdrawal notification. EPA will not refund fees after granting a firm certification or re-certification. If your application is disapproved, EPA will not refund fees. Refunds are not available for replacing a certificate. Refund and withdrawal requests must be sent to the following address:


Paint will be your next-biggest cost, at anywhere from $20 to $70 or more per gallon, depending on the sheen, the grade you’ve chosen and any special features. Some paints, for instance, are mold resistant. Others suppress smells or require fewer coats. Some have a lifetime warranty. Paints with warranties, however, may not be worth a higher price. In Consumer Reports tests approximating nine years of wear, only a few exterior paints and stains with lifetime warranties held up well. But “you’ll grow tired of the color long before a good-quality paint wears out,” Bancroft says.
Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.
Interesting information! We just got scammed in White Stone, Virginia... we chose the same color, but went from a flat to an eggshell finish. I wasn't available to stand over the painter while he painted. For such a detailed job, I marveled at how quickly he finished the project! After he was paid for the job, we discovered all he did was roll paint across the walls and close to the crown, baseboards and detailed trim around windows and doors leaving about an inch or so of the flat finish. By using the same color, he didn't even do the job he was paid to do, which explained why he could finish the job so quickly. By using the same color... he got lucky and passed it off as a completed job not bothering to paint to and cut in around the trim. Upon further evaluation of our walls we could see exactly where he stopped because we could see the difference between the flat and eggshell finishes. There are walls he didn't even bother to paint. Then where he did paint near the crown when we were in the room watching ... he hit the crown moulding and tried to tell us it was already there... and tried to sell us on painting the crown moulding. I am so disgusted and upset!! He'll be hearing from us to rectify the situation.
Even after collecting bids and comparing initial impressions of different home painters in Atlanta, you may be unsure who to hire, or even how to evaluate whether they do good work or not. That's understandable in a city where Bobby Petrino didn't even finish out one football season at the helm of the Atlanta Falcons! When it comes to Atlanta home painters and their work, the key to evaluating quality is focusing on the details. Determining whether past paint jobs have held up over time, for example, is a good indication of whether the Atlanta house painter you're checking up on put in the proper amount of prep necessary for the job. Also, don't be afraid to ask to see a sample of the painter's work in person. Almost any paint job looks good from the street or in a well-shot photograph. The question is whether a house painter in Atlanta's work looks equally impressive once you get up close and personal.
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
Minor repair and maintenance activities that disturb 6 square feet or less of paint per room inside, or 20 square feet or less on the exterior of a home or building. (Note: Window replacement, and partial and full demolition activities, are always covered regardless of square footage.  Activities designated as “prohibited” are prohibited regardless of square footage.)
We had a bad experience with an interior painter years ago, with the crux of the problem being him overcharging us at the end for "extra work" he didn't anticipate. One thing I'd strongly recommend is making sure it's in the contract that any additional work or growth work is estimated and communicated to the owner as soon as it is identified, otherwise the owner is not liable to pay it at the end.
This all comes down to the rules.....1. references....does the contractor have them??? I ALWAYS furnish all my prospective customers them....no excuses...2. insurance....again, I always furnish proof....3. Read the proposal carefully...I ALWAYS list materials down to tape used, the brand, the grit of sandpaper, the manufacturer, etc....its INEXCUSABLE to not list all of these items....I am a member of the PDCA, the Painting and Decorating Contractors of America, the foremost authority in the coatings industry and they also approve of what I listed....if you do not follow these guidelines, you will NOT get a job reflective of "professional". Look for the PDCA where any painting contractors are, if they are not a member, RUN!
×